395 Anderson Blvd - Clarksdale, MS 38614 - 1-800-843-5241

"Cotton House" Module Builder
Safety Precautions

  1. Do not park vehicles or place objects within 15 feet of the rear of the module builder.
  2. All personnel except operator should stand clear of the Module Builder during preparation for and movement of Module Builder from one location to another.
  3. Keep out of machine when in use.
  4. Keep all personnel clear of top of Module Builder and bridge when operating Module Builder.
  5. Never unlock tamper cylinder when tamper foot is in raised position.
  6. Never operate tamper if tamper cylinder is not in locked position.
  7. Do not allow tamper bridge to ram ends of Module Builder.
  8. Never transport unit with tamper cylinder in raised position. Make sure tamper bridge is at front of Module Builder and tamper cylinder is in the down (transporting) position.
  9. Do not pull unit without first placing safety pins in transporting holes to prevent damage to wheel cylinders, and make sure PTO is disengaged.
  10. Do not exceed 1300 tractor RPM or hydraulic pump may be damaged.
  11. Pressure gauge was preset at 2000 PSI. Do not exceed this level.
  12. Turn on flashing lights when transporting unit on highway unless prohibited by law.
  13. Do not operate unit close to high voltage electric lines.