Maintenance
Preventive maintenance is the key to the long life of any mechanical device.
Careful and systematic inspection of the Seed Tender will result in maximum, trouble-free service.

Periodic Clean-Out:
Due to the characteristics of certain material, residue sometimes collects between the tender auger and the tube. Check the clean-out door periodically for any material build-up in this area. If residue appears excessive, wash and clean tube.

Lubrication:
All bearings, which are fitted with grease zerks, should be lubricated at the conclusion of each operating day. Before greasing the bearings, make certain the zerks are free of dirt, otherwise this will be passed into the bearing race. If the unit will be out of service for a period of time, purge the bearings.